The world’s most powerful curing light.



Pen grip
The pen grip is ergonomically designed for comfort and precise control.

Bilateral identical control buttons
Treat the upper and lower arches with maximum efficiency using the bilateral control buttons. Identical control buttons on either side allow you to rotate the light to achieve the best angle for maximum bond strength.

Provides maximum flexibility in the office; go from chairto- chair or office-to-office.

Highest output intensity of LED curing lights:
4,000 - 6,000 mW/cm2 , with a peak wavelength of 460 ± 20 nm. Output is the same as plasma arc light.

Adjustable tip
Light tip can adjust ± 15° for better access to distal regions of the mouth; 8 mm light tip is ideal for use with fixed appliances.

Cure time on one charge is approximately 500 seconds (approximately 20 or more quadrants).








The FlashMax P3 has three programs:

flashmax tableau

Continuous curing mode, 3 seconds with 0.5 second pause, is ideal for direct or indirect bonding.


Power supply
Input Power 100-240VAC, 50/60Hz
Output power 5VDC, 1.0A

Nominal voltage 3.2 V
Nominal capacity 1200 mA
Battery type LiFePO4
Recharging time 2 hours

Dimensions L 225 mm, D 25 mm


FlashMax embout



Covers are disposable and available in bags of 10 pieces.
Tips easily click on and off and can be adjusted 30 degrees for optimal access.
You may choose between the 4 or 8 mm tip.

Follow us / Retrouvez nous :